• Scott McMillan

Care & Maintenance of Aluminium Joinery

Cleaning should take place at least every six months. In areas where environmental deposits are more prevalent, such as beach front houses and industrial or geothermal areas, then cleaning should be carried out every two to three months

Three steps to cleaning powder-coated joinery & hardware

Step 1. Remove the deposits with a wet sponge rather than risk scratching the surface with dry dusting. Step 2. Using a soft brush/cloth and a mild household detergent in warm water, clean the surface to remove dust, salt or other deposits Step 3. Always rinse with fresh water after cleaning to remove any remaining detergent.

Precautions for powder-coated joinery & hardware

* Never use aggressive solvent cleaners on the product * Avoid the use of any solvents near joints or plastic components * Ensure that the solvents are thoroughly washed from the surface * Mask windows if painting, where paint or plaster has spilled on the powder-coated surface, remove immediately with water or methylated spirits. Prolonged use of methylated spirits is not recommended.

39 views0 comments